LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2019 >> XT5 Base, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Monitor Module Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. GM4285192Courtesy of GENERAL MOTORS COMPANY

    Battery Monitor Module (3) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Post Negative Cable Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
  3. Electrical Connector (2) - Connect
  4. GM4285190Courtesy of GENERAL MOTORS COMPANY

    Battery Negative Cable (3) - Install

  5. Use an open ended wrench to hold the battery sensor ground tab, while tightening the battery negative cable nut. (2)
  6. Battery Negative Cable Nut (1) @ Battery Monitor Module - Tighten 11 N.m (97 lb in)
  7. Perform the battery sensor learn procedure. Battery Sensor Module Learn 
scientia non olet · About LEMON Manuals