LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2019 >> XT5 Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> OnStar Button LED Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If the green LED is off with the ignition ON and the LED does not function when commanded with the scan tool, contact the OnStar Center to confirm the vehicle has a current subscription.
  1. Vehicle in Service Mode/Ignition ON.
  2. Verify no DTCs are set.
    • Go to next step: If no DTCs are set 
  3. Verify that the green LED turns ON and OFF when commanding the Green Indicator ON and OFF with a scan tool.
    • If the green LED does not turn ON and OFF 

      Refer to Circuit/System Testing - Green LED Test

    • Go to next step: If the green LED turns ON and OFF 
  4. Verify that the red LED turns ON and OFF when commanding the Red Indicator ON and OFF with a scan tool.
    • If the red LED does not turn ON and OFF 

      Refer to Circuit/System Testing - Red LED Test

    • Go to next step: If the red LED turns ON and OFF 
  5. All OK.
scientia non olet · About LEMON Manuals