LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2019 >> XT5 Base, FWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Control Systems >> Steering Wheel And Column >> Diagnostic Information and Procedures >> DTC B2910 >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Clear the DTCs.
  3. Verify DTC B2910 is not set.
    • If the DTC is set 
    1. Perform the following learn procedure:Immobilizer System Component Programming (without BTM)Immobilizer System Component Programming (with BTM) - Select the Body Control Module Immobilizer (IMMO) Function with New Transponder or Remote Key, but use the customer's existing key.
    2. Clear the DTCs.
    3. Ignition/Vehicle & All vehicle systems - Off
    4. Door - All - Closed
    5. Wait for greater than 5 min.
    6. Ignition - On / Vehicle - In Service Mode
    7. Operate the vehicle within the Conditions for Running the DTC.

      Verify the DTC does not set.

      • If the DTC sets - Replace the component:K60 Steering Column Lock Module
      • Go to next step: If the DTC is not set
    8. All OK.
    • Go to next step: If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals