Circuit/System Verification
- Ignition ON/vehicle in Service Mode
- Verify DTC B1446 or B1447 is not set in the Telematics Communication Interface Control Module
- If DTC B1446 or B1447 is set
Repalce the C3 Telematics Communication Interface Control Module Battery
- Verify DTC B1446 or B1447 is not set in the Telematics Communication Interface Control Module
- If DTC B1446 or B1447 is set
Replace the K73 Telematics Communication Interface Control Module
- Go to next step: If DTC B1446 or B1447 is not set
Go to next step: All OK
- Go to next step: If DTC B1446 or B1447 is not set
- Go to next step: If DTC B1446 or B1447 is not set
- If DTC B1446 or B1447 is set
- All OK