Fastener Specifications
WARNING: This page is about a different car, the 2018 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Antenna Coaxial Cable Bolt | 9 N.m (80 lb in) |
| Front Floor Speaker Nut | 6 N.m (53 lb in) |
| Front Side Door Trim Panel Bolt | 2.5 N.m (22 lb in) |
| High Frequency Antenna Nut | 9 N.m (80 lb in) |
| Human Machine Interface Control Module Bracket Bolt | 2.5 N.m (22 lb in) |
| Human Machine Interface Control Module Bracket Nut | 9 N.m (80 lb in) |
| Quarter Window Trim Finish Panel Bolt | 2.5 N.m (22 lb in) |
| Radio Antenna Module Bolt | 9 N.m (80 lb in) |
| Radio Bracket Bolt | 2.5 N.m (22 lb in) |
| Radio Bracket Nut | 9 N.m (80 lb in) |
| Radio Control Bolt | 2.5 N.m (22 lb in) |
| Radio Front Center Speaker Bolt | 2.5 N.m (22 lb in) |
| Radio Front Side Door Speaker Fastener | 2.5 N.m (22 lb in) |
| Radio Front Speaker Bolt | 2.5 N.m (22 lb in) |
| Radio Rear Side Door Speaker Fastener | 2.5 N.m (22 lb in) |
| Radio Speaker Amplifier Nut | 6 N.m (53 lb in) |