Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify the scan tool parameter:Trunk Lid/Liftgate Window Exterior Unlatch Switch=Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component:S58A Rear Compartment Lid Unlatch Switch - Exterior - Pressed
Verify the scan tool parameter:Trunk Lid/Liftgate Window Exterior Unlatch Switch=Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- All OK.