Input Shaft Bearing Retainer Front Seals Installation

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

DT-305-1/KM-305-1 Remover/Installer
DT-49952 Installer

For equivalent regional tools, refer to Special Tools .

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Install the NEW seal with the notched surface of the seal facing the installer tool.

Install the input shaft front (inner) seal (1), to the transfer case using the DT-49952 installer (2) and DT-305-1/KM-305 - 1 remover/installer (3).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Install the NEW seal with the notched surface of the seal facing the installer tool.

Install the input shaft front (outer) seal (1), to the transfer case using the DT-49952 installer (2) and DT-305-1/KM-305 - 1 remover/installer (3).