Fastener Specifications
WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Side Door Latch | 10 N.m (89 lb in) |
| Front Side Door Lock Striker Bolt | 25 N.m (18 lb ft) |
| Front Side Door Outside Bracket Screw | 5 N.m (44 lb in) |
| Front Side Door Outside Handle Insert Screw | 1.5 N.m (13 lb in) |
| Front Side Door Outside Handle Lock Cylinder Bezel Screw | 10 N.m (89 lb in) |
| Rear Compartment Lid Latch Bolt | 9 N.m (80 lb in) |
| Rear Compartment Lid Latch Striker Fastener | 9 N.m (80 lb in) |
| Rear Side Door Latch | 10 N.m (89 lb in) |
| Rear Side Door Lock Striker Bolt | 22 N.m (16 lb ft) |
| Rear Side Door Outside Bracket Screw | 5 N.m 44 lb in |
| Rear Side Door Outside Handle Insert Screw | 1.5 N.m (13 lb in) |
| Rear Side Door Outside Handle Lock Cylinder Opening Cover Screw | 4.7 N.m (42 lb in) |