Installation Procedure
WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
Audio Rear Control (1) - Install
- CAUTION:
Rear Seat Armrest Cup Holder Bolt (3) - Install and tighten [2x] 2.5N.m (22 lb in)
- Rear Seat Armrest Cup Holder (2) - Install
- Rear Seat Armrest Cup Holder Bolt (1) - Install and tighten [6x] 2.5N.m (22 lb in)
Rear Seat Armrest Side Trim Panel (1) - Install