Steering Power Variable Control Module Replacement (NXC Only)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Knee Bolster Replacement
1	Steering Power Variable Control Module Procedure Release the control module clips. Disconnect the connector from the control module. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

Preliminary Procedure
Instrument Panel Knee Bolster Replacement

Steering Power Variable Control Module

Procedure

Release the control module clips.
Disconnect the connector from the control module.
Perform the necessary programming and setup procedure:Control Module References