LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> CT4 V, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup >> Repair Instructions >> K69 Transfer Case Control Module: Programming and Setup >> Programming an Existing or New Control Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Access SPS and follow the on-screen instructions for the control module:K69 Transfer Case Control Module
  2. Perform the SPS function:K69 Transfer Case Control Module - Programming
  3. Perform the scan tool configuration/reset function:Transfer Case Clutch Identifier
  4. Clear DTCs.
scientia non olet · About LEMON Manuals