LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> CT5 Sport, RWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K157 Video Processing Module: Programming and Setup >> Replace and Program Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Control Module

To program a replacement or an existing control module, perform the following procedure:

  1. Ignition/Vehicle OFF.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K157 Video Processing Control Module - Programming and follow the on-screen instructions.
  4. Clear DTCs.
  5. Calibrate Vehicle Processing Control Module. Refer to: Video Processing Control Module Calibration
scientia non olet · About LEMON Manuals