K180 Driver Monitoring System Control Module: Scan Tool Information
NOTE:
Due to software and hardware variations, not all information may be applicable.
K180 Driver Monitoring System Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Driver's Direction of Sight | - | Varies | This displays On-Road, Off-Road, Driver's Lap, Center Console, Eyes Closed, or Invalid. |
| Time Driver is Looking in Same Direction | - | No, Yes | This displays the amount of time the driver is looking in the same direction in seconds. |
| Manufacturer Enable Counter | - | Varies | This displays the Manufacturer Enable Counter. |
| System Power Mode | - | Off, Accessory, Run, Crank Request | This displays the current system power mode. |
| System Voltage | - | 9 - 16 V | The scan tool displays the current battery voltage. |
Power Steering Control Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Steering Wheel Lane Centering Indicators | Should be TWO versions of this output control in scan tool. 1. A short duration (10 second) check for LED function, just to verify that LEDs can turn ON when commanded 2. An extended duration used when verifying DMS functionality in a service bay, which is used in conjunction with monitoring the scan tool data for Driver Attention State to see if system can track the driver. Vehicle Speed must be 0. |
| Steering Wheel Lane Centering Indicators | Should be TWO versions of this output control in scan tool. 1. A short duration (10 second) check for LED function, just to verify that LEDs can turn ON when commanded 2. An extended duration used when verifying DMS functionality in a service bay, which is used in conjunction with monitoring the scan tool data for Driver Attention State to see if system can track the driver. Vehicle Speed must be 0. |
| Control Module Reset | This device control allows a tool user to force the ECU to reset the learned source Ids for serial data. |