LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Programming And Setup) >> Repair Instructions >> K124 Active Safety Control Module: Programming and Setup (for K124A and K124B (With UKL)) >> Replace and Program Active Safety Control Module or Reprogram Active Safety Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program Active Safety Control Module or Reprogram Active Safety Control Module

WARNING: This page is about a different car, the 2020 Cadillac CT6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement or an existing K124 Active Safety Control Module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K124A/B Active Safety Control Module 1/2 - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K124A/B Active Safety Control Module 1/2 - Setup and follow the on-screen instructions.
  4. Clear DTCs.
scientia non olet · About LEMON Manuals