LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (Vehicle Diagnostic Scan Tool Information (2 Of 2)) >> Specifications >> K186 Multifunction Energy Storage Capacitor Control Module: Scan Tool Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

K186 Multifunction Energy Storage Capacitor Control Module: Scan Tool Information

WARNING: This page is about a different car, the 2020 Cadillac CT6. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Data Parameters

Parameter System State Expected Value Description
Operating Conditions:  Vehicle in Run power mode, engine off.
Accessory Circuit Voltage - 11 - 14 V Current Vehicle Battery Voltage
Backup Power Request Circuit Voltage - 11 - 14 V Monitored system voltage
Control Module Status - Unlocked The scan tool displays the lock or unlocked state of the control module
Energy Storage Capacitor 1 Temperature - Varies The scan tool displays the temperature of capacitor 1.
Energy Storage Capacitor 2 Temperature - Varies The scan tool displays the temperature of capacitor 2.
Energy Storage Capacitor Isolator Transistor 1 Temperature - Varies The scan tool displays the temperature of capacitor isolator switch 1.
Energy Storage Capacitor Isolator Transistor 2 Temperature - Varies The scan tool displays the temperature of capacitor isolator switch 2.
Energy Storage Capacitor Voltage - Varies The scan tool displays the capacitors actual voltage.
Output Voltage 1 - Varies The scan tool displays output 1 voltage.
Output Voltage 2 - Varies The scan tool displays output 2 voltage.
Run/Crank Circuit Voltage - 11 - 14 V The scan tool displays monitored Run/Crank voltage.
State of Charge - Varies The scan tool displays measured capacitor voltage.
Scan Tool Output Controls

Output Control Description
Control Module Self-Test Initializes the self test procedure. Unlocks the control module so certain latched DTCs may be cleared.
Discharge Energy Storage Capacitor Initializes capacitor discharge to prepare module for removal.
Energy Storage Capacitor Learn Only to be used if B101D 00 is set. This initializes the capacitance reset.