LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Programming And Setup - All Systems) >> Repair Instructions >> K107C Drive Motor 3 Control Module: Programming and Setup >> Replace and Program Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Control Module

WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement K107C Drive Motor Control Module 3 perform the following procedure:

  1. Replace the K107C Drive Motor Control Module 3.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
    3. NOTE:

    The K107 Drive Motor Control Module, K107B Drive Motor Control Module 2 and K107C Drive Motor Control Module 3 will be programmed together.

  3. On the SPS Supported Controllers screen, select K107 - Drive Motor Control Module - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K107 - Drive Motor Control Module - Setup and follow the on-screen instructions.
  5. Clear DTCs.
scientia non olet · About LEMON Manuals