LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Programming And Setup - All Systems) >> Repair Instructions >> K16 Battery Energy Control Module: Programming and Setup >> Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Control Module

WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.

To reprogram an existing K16 Battery Energy Control Module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. Perform the following SPS Programming function:
    NOTE:

    The K16 Battery Energy Control Module and K16B Battery Energy Control Module 2 must be programmed together.

    K16/K16B Battery Energy Control Modules and follow the on-screen instructions.

  3. Clear DTCs after completing the Programming procedure.
  4. Perform the following SPS function:
    1. Setup

      K16 Battery Energy Control Module and follow the on-screen instructions.

  5. Clear DTCs.
scientia non olet · About LEMON Manuals