LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Suspension Controls) >> Repair Instructions >> Electronic Suspension Control Module Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Electronic Suspension Control Module Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
GM3630901Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the spare tire and wheel assembly to access the control module.
1 Electronic Suspension Control Module Nut (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Procedure 
Loosen the electronic suspension control module nuts.
Tighten 
10 N.m (89 lb in)
2 Electronic Suspension Control Module (ESC) Connector
Procedure 
Disconnect the electrical connector from the module.
3 Electronic Suspension Control (ESC) Module

Procedure

  1. Remove the ESC module from the slots in the frame.
  2. Reprogram the ESC module. Control Module References
scientia non olet · About LEMON Manuals