Steering Column Control Module Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Knee Bolster Replacement (Chevrolet/GMC) , or Instrument Panel Knee Bolster Replacement (Cadillac)
1	Steering Column Control Module Bolt CAUTION: Refer to Fastener Caution . Tighten .9 - 1.4 N.m (8 - 12 lb in)
2	Steering Column Control Module Procedure Disconnect the electrical connectors. Perform the steering column tilt wheel and telescope control module learn procedure. Steering Column Tilt Wheel and Telescope Control Module Learn NOTE: Several wiring harnesses are secured to the steering column control module. Note the routing of the harnesses before removing them from the retainers to aid in installation.

Callout

Component Name

Preliminary Procedure
Instrument Panel Knee Bolster Replacement (Chevrolet/GMC) , or Instrument Panel Knee Bolster Replacement (Cadillac)

Steering Column Control Module Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
.9 - 1.4 N.m (8 - 12 lb in)

Steering Column Control Module

Procedure

Disconnect the electrical connectors.
Perform the steering column tilt wheel and telescope control module learn procedure. Steering Column Tilt Wheel and Telescope Control Module Learn

NOTE:

Several wiring harnesses are secured to the steering column control module. Note the routing of the harnesses before removing them from the retainers to aid in installation.