Keyless Entry Control Module Bracket Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the quarter lower rear trim panel - left side. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side, Standard Wheelbase) , or Quarter Lower Rear Trim Panel Replacement (Left Side, Extended Wheelbase) .
1	Keyless Entry Control Module Bracket Fasteners (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Keyless Entry Control Module Bracket Procedure Disconnect the electrical connections. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure
Remove the quarter lower rear trim panel - left side. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side, Standard Wheelbase) , or Quarter Lower Rear Trim Panel Replacement (Left Side, Extended Wheelbase) .

Keyless Entry Control Module Bracket Fasteners (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Keyless Entry Control Module Bracket

Procedure

Disconnect the electrical connections.
Transfer components as necessary.