LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2021 >> CT5 V, RWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K36 Restraints Control Module: Programming and Setup >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Place the vehicle on level ground (the vehicle must be level or the IMU setup may fail)
  2. Ignition OFF
  3. Access SPS and follow the on-screen instructions for the control module: K36 Restraints Control Module
  4. Perform the SPS function: Programing
  5. Perform the SPS function: Setup
scientia non olet · About LEMON Manuals