A26 Heater and Air Conditioning User Interface Control - Front: Scan Tool Information
A26 Heater and Air Conditioning User Interface Control - Front Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON/ Vehicle in Service Mode | |||
| Base Model Part Number | - | Varies | The 8 - Digit Base Model Part Number is the part number for the hardware without software and calibrations. |
| Base Model Part Number - Alpha Code | - | Varies | The scan tool displays the Base Model Alpha Code |
| Boot Software Number | - | Varies | The scan tool displays the 8 - Digit Boot Software Part Number |
| Communication Channel Status - CAN | - | Varies | The scan tool displays the status of the CAN Bus |
| Diagnostic Data Identifier | - | Varies | The scan tool displays the 4 character alphanumeric device ID. |
| End Model Part Number | - | Varies | The 8 - Digit End Model Part Number is the part number for the hardware of the control module with software and calibrations. |
| End Model Part Number - Alpha Code | - | Varies | The scan tool displays the End Model Alpha Code |
| Power Mode | - | Run | The scan tool displays the current vehicle power mode. |
| Vehicle Identification Number (VIN) | - | Varies | The scan tool displays the learned VIN |