LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2023 >> LYRIQ Debut Edition >> Repair and Diagnosis >> Electrical >> Charging Systems >> Plug-In Charging System >> Repair Instructions >> Battery Charger Replacement - Battery Charger Control Module 2 >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM6084856Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Adapter (4) - Install [2x]

    2. CAUTION:

    Refer to Fastener Caution

  2. Drive Motor Battery Charger Bolt (3) - Install and tighten [4x] - Fastener Specifications 
  3. Drive Motor Battery Charger Bracket (2) - Install [2x]
  4. Drive Motor Battery Charger Bracket Nut (1) - Install and tighten [2x] - Fastener Specifications 
  5. GM6084852Courtesy of GENERAL MOTORS COMPANY

    Battery Charger (1) - Install

  6. GM6084850Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Bracket Bolt (1) - Install and tighten [4x] - Fastener Specifications 

  7. GM6084847Courtesy of GENERAL MOTORS COMPANY

    Radiator Outlet Hose Retainer (1) - Install

  8. GM5946250Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Bracket (3) - Install

  9. Drive Motor Battery Charger Ground Bolt (2) - Install and tighten [2x] - Fastener Specifications 
  10. Drive Motor Battery Charger Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  11. GM5993513Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors. (1)

  12. Connect the wiring harness retainers. (2)
  13. GM5950645Courtesy of GENERAL MOTORS COMPANY

    Auxiliary Heater Inlet and Outlet Pipe Bracket Stud (1) - Install and tighten - Fastener Specifications

  14. GM5950643Courtesy of GENERAL MOTORS COMPANY

    Wiring Harness Clip (1) - Install

  15. GM5950642Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Battery Charger Receptacle Coolant Inlet Secondary Hose (2) @ Battery Charger - Install

  16. Retainer (1) - Engage
  17. GM5951583Courtesy of GENERAL MOTORS COMPANY

    Heater Inlet and Outlet Pipe Clamp (3) - Install

  18. Retainer (2) - Install
  19. Drive Motor Battery Charger Inlet Hose (4) @ Battery Charger - Install
  20. Retainer (1) - Engage
  21. GM5925550Courtesy of GENERAL MOTORS COMPANY

    Front Trim Finish Compartment Support (2) - Install

  22. Front Trim Finish Compartment Bolt (1) - Install and tighten [4x] - Fastener Specifications
  23. Connect the wiring harness retainers.
  24. GM5923708Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Front Sight Shield (2) - Install

  25. GM5923709Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Front Compartment Side Sight Shield- Right Side (2) - Install

  26. Fill the cooling system to the proper level. Drive Motor Battery Cooling System Draining and Filling (RWL) , or Drive Motor Battery Cooling System Draining and Filling (XFD)
  27. Enable the high voltage system. High Voltage Enabling
scientia non olet · About LEMON Manuals