Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful setup event, perform the following steps:

1. Ignition/Vehicle OFF. Ensure the Image Processing Module, DLC and programming tool connections are secure and the SPS software is up to date.
2. Ensure the Image Processing Module, DLC and programming tool connections are secure and the SPS software is up to date.
3. Verify the K124 Image Processing Module can be reprogrammed.
   • If the K124 Image Processing Module cannot be reprogrammed 
   1. Ignition/Vehicle OFF, all access doors closed, all vehicle systems OFF for one minute.
   2. Verify the K124 Image Processing Module can be reprogrammed.
      • If the image processing module cannot be reprogrammed, replace the K124 Image Processing Module.
      • Go to next step: If the K124 Image Processing Module can be reprogrammed.
   3. All OK.