K180 Driver Monitoring System Control Module: Scan Tool Information
NOTE:
Due to software and hardware variations, not all information may be applicable.
K180 Driver Monitoring System Control Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Vehicle Identification Number (VIN) | - | Varies | The scan tool displays the learned VIN |
| End Model Part Number | - | Varies | End Model Part Number is the part number for the hardware of the control module with software and calibrations. |
| Base Model Part Number | - | Varies | Base Model Part Number is the part number for the hardware without software and calibrations. |
| Manufacturer's Traceability Number | - | Varies | |
| Diagnostic Data Identifier | - | Varies | The scan tool displays the 4 character alphanumeric device ID. |
| Manufacturer Enable Counter | - | Varies | |
| Boot Software Part Number 1 Alpha Code | - | Varies | |
| Application Software Part Number 1 Alpha Code | - | Varies | |
| Calibration Part Number 1 | - | Varies | |