Differential Assembly: Specifications
| Carrier Type | Integral | |
| Ring Gear Pinion Backlash | Method | Shims Inch (in) |
| Adjustment | .005-.008 Inch (in) | |
| Pinion Bearing Preload | Method | Spacer |
| New Bearings | 24-32 Inch Pound-Force (in.lb) Note: Use inch-pound torque wrench on pinion shaft nut. | |
| Used Bearings | 8-12 Inch Pound-Force (in.lb) Note: Use inch-pound torque wrench on pinion shaft nut. | |
| Differential Bearing Preload | Method | Shims |
| New Bearings | .008 Inch (in) Note: Slip fit plus 0.004 inch additional preload per side. | |
| Used Bearings | .008 Inch (in) Note: Slip fit plus 0.004 inch additional preload per side. |