LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1987 >> Chevette 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Wheel Alignment Specifications & Procedures (Fwd)) >> Alignment Specifications >> BONNEVILLE
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Alignment Specifications: BONNEVILLE

WARNING: This page is about a different car, the 1987 Pontiac Bonneville, 1987 Oldsmobile Delta 88, and 1987 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (BONNEVILLE) (1)(2)

Application Specification
Caster (Degrees) 2.5° +/- 1/2°
Camber (Degrees)
Front .2° +/- .5°
Rear - .3 +/- .5
Toe-in (Inches)
Front 0 +/- 1/10°
Rear 0° +/- 1/10°
(1) Reverse toe-in when backed on alignment rack.
(2) Positive degrees indicate toe-in; negative degrees indicate toe-out.
scientia non olet · About LEMON Manuals