October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Reverse Input Clutch: Disassembly
- Remove retaining ring from reverse input clutch housing. Remove backing plate, steel clutch plates, composition plates and Belleville plate. See Figure
. Note number of clutch plates used. Using Clutch Spring Compressor (J-23327), compress reverse input spring assembly.
- Remove retaining ring. Remove clutch spring compressor, and remove spring assembly. Remove piston and seals. Thickness of composition plates should be .068-.074" (1.73-1.88 mm). Selective thickness backing plate is also used.