October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Replacement

Brushes

Check for cracks and minimum length of .18-.22" (4.5-5.5 mm). If damaged or worn, replace brushes. Brushes should slide smoothly in holders. Install new springs when replacing brushes. Solder brush wire.
New brush protrusion should be .49" (12.5 mm) for Tercel, .61" (15.5 mm) for Prelude, and .41" (10.5 mm) for all other models.

Fig 1: Exploded View of Spectrum & Sprint Alternators