October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Leakage Test
- Open tester shutoff valve an additional 1/2 to 1 1/2 turns. Blow dry nozzle tip. Slowly depress tester lever until pressure gauge reads 1400 psi (98 kg/cm2
). Maintain pressure for 10 seconds and observe nozzle tip.
- A drop may form on end of injector, but should not drop off within a 10 second period. Replace injector if drop of test fluid drops from tip during the 10 second period. See Fig 1. Release tester pressure.
Courtesy of GENERAL MOTORS CORP.