October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Downshift Control Relay (THM 400)
- Disconnect wiring harness connector to downshift control relay. Measure resistance between relay terminals "D" and "F". See Fig 1. Resistance should be 20 ohms. If resistance is not as specified, replace downshift control relay.
- Connect ohmmeter between relay terminals "A" and "E". See Fig 1. No continuity should be present. If continuity is present, replace shorted downshift control relay.
Courtesy of GENERAL MOTORS CORP.