LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1992 >> Beretta Base, 2.2 4, Standard >> Repair and Diagnosis >> Electrical >> Component Locations >> Electrical Component Locator >> Circuit Protection Devices
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit Protection Devices

CIRCUIT PROTECTION DEVICES LOCATION

Component Location
Battery Junction Block (3.1L VIN T) On bracket, in engine compartment, near blower fan housing. See Figure .
Battery Junction Block On bracket, in engine compartment, near blower fan housing. See Figure .
Convertible Top Circuit Breaker In-line with roof switch circuit, taped to harness.
ECM/Fuel Pump In-Line Fuse
2.2L (VIN 4) On bracket, near blower fan housing, in engine compartment. See Figure .
2.3L (VIN A) On bracket, near blower fan housing, in engine compartment. See Figure .
3.1L (VIN T) On bracket, near blower fan housing, in engine compartment. See Figure .
ECM/Fuel Pump In-Line Fuse On bracket, near blower fan housing, in engine compartment. See Figure .
Fuse Block
2.2L (VIN 4) Behind left side of dash. See Figure .
2.3L (VIN A) Behind left side of dash. See Figure .
3.1L (VIN T) Behind left side of dash. See Figure .
Fusible Links
"A" (Red) Cooling Fan Relay At battery junction block. See Figure .
"B" (Red) Charging System At starter solenoid.
"C" (Red) Charging System At starter solenoid.
"D" (Red) Accessories At starter solenoid.
"E" (Rust) ABS Relay At battery junction block. See Figure .
"F" (Red) Fog Lights At battery cable terminal.
"G" (Gray) Air Bag At starter solenoid.
"J" (Red) ABS On ABS actuator motor assembly.