Window Regulator Handle

Removing Window Regulator Handle:

REMOVE OR DISCONNECT
Tool Required:
J-9886-01 Door Handle Clip Remover
1. Spring clip (18) by pushing J-9886-01 between the window regulator handle (19) and the door trim panel.
2. Window regulator handle (19) from the window regulator spindle.
3. Bearing plate from window regulator spindle.

INSTALL OR CONNECT
1. Spring clip (18) onto the window regulator handle (19).
2. Bearing plate onto the window regulator spindle.
3. Window regulator handle (19) to window regulator spindle.