LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1993 >> APV >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 4T60-E >> Transaxle Disassembly >> Drive Link Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Link Assembly

NOTE: See Figure for exploded view of all internal components (from drive link support to final drive assembly). See Figure for thrust washer and bearing locations. See Figure for lip seal locations.
  1. Remove "O" ring from turbine shaft. See Figure. Remove turbine shaft drive sprocket, driven sprocket and drive link chain together as an assembly. Note position of Copper-colored link on drive link chain; it should be installed facing up.
  2. Remove drive sprocket and driven sprocket thrust washers from between sprockets and channel plate. Remove chain scavenging scoop and driven sprocket support with 2nd clutch thrust washer.
NOTE: If deflection of drive link chain exceeds 1 1/16", check drive link chain, sprockets and supports for wear; replace if necessary.
scientia non olet · About LEMON Manuals