Toe-In Adjustment (Rear)
- Adjust left and right sides separately. Lubricate threads of Turnbuckle Adjuster (J-38118). Install turnbuckle adjuster between hole in rear suspension rod and hole in jackstand pad. See Fig 1
. Ensure equal number of threads are exposed on both sides of turnbuckle. Hand-tighten turnbuckle adjuster.
- Loosen nut on bolt securing rear suspension rod to crossmember at least 4 turns. Rotate turnbuckle adjuster as necessary until rear toe-in is as specified. See ALIGNMENT SPECIFICATIONS
table. Tighten rear suspension rod nut at crossmember to specification. See TORQUE SPECIFICATIONS
.
Courtesy of GENERAL MOTORS CORP.