LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1995 >> S10/T10 P/U 2WD L4-2.2L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Diagrams >> Diagnostic Aids >> General Troubleshooting Procedures >> Troubleshooting Tests >> Testing For Continuity
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Testing For Continuity

1. Disconnect the vehicle's battery.
2. Connect one lead of a self-powered test lamp or ohmmeter to one end of the part of the circuit you wish to test.
3. Connect the other lead to the other end of the circuit.
4. If the self-powered test lamp glows, there is continuity. If you are using an ohmmeter, low or no resistance means good continuity.
scientia non olet · About LEMON Manuals