LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1996 >> G 10 Van V6-4.3L VIN W >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Diagrams >> Diagnostic Aids >> General Troubleshooting Procedures >> Troubleshooting Tests >> Testing For Continuity
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing For Continuity

Continuity Check Through A Switch:




1. Disconnect the vehicle's battery.
2. Connect one lead of a self-powered test lamp or ohmmeter to one end of the part of the circuit you wish to test.
3. Connect the other lead to the other end of the circuit.
4. If the self-powered test lamp glows, there is continuity. If you are using an ohmmeter, LO or no resistance means good continuity.

scientia non olet · About LEMON Manuals