Ride/Trim Height Specifications

Z Height Measurement



NOTE: Measure from the lower control arm pivot bolt center line down to the lower corner of the steering knuckle to obtain the Z height dimension.
Z Height:
Service Checking 80.0 mm (3.10 inch)
Service Setting 74 - 86 mm (2.86 - 3.34 inch)



D Height Measurement



NOTE: Measure from the bottom of the rear axle stop bracket (1) to the top of the rear axle (2) to obtain the D height dimension.
D Height:
Service Checking 140 mm (5.50 inch)
Service Setting 134.5 - 145.5 mm (5.26 - 5.74 inch)