LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Astro Van Cargo, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Removal & Installation >> Remote Keyless Entry Receiver >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry Receiver: Installation

  1. Install the keyless entry control module to the vehicle.
  2. Install the screws retaining the control module to the carrier. Tighten the screws retaining the control module to the carrier to 18 INCH lbs. (2 N.m.).
  3. Connect the remote keyless entry receiver electrical connector.
  4. Install the radio, or the instrument panel storage compartment to the vehicle.
  5. Install the instrument panel cluster trim plate.
  6. Reprogram the transmitter. Refer to REMOTE TRANSMITTER in PROGRAMMING  .
  7. Verify that the system operates properly.