Front Wheel Toe Adjustment

1. Set the steering wheel in a straight-ahead position within -3.5 to 3.5 degrees.
2. Make toe adjustments separately at each individual tire and wheel.
3. Loosen the nut on the inner tie rod.





4. Adjust the toe to specification by turning the inner tie rod. Refer to Wheel Alignment Specifications.

NOTICE: Refer to Fastener Notice in Service Precautions.

5. Verify that the steering gear boot seal is not twisted.
- Tighten the nut to 47 Nm (35 ft. lbs.).

6. Check the toe alignment specifications for adjustment. Readjust the assembly by repeating steps if necessary. Refer to Wheel Alignment Specifications.