Clutch Switch: Service and Repair

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the battery negative cable.
2. Remove the instrument panel driver knee bolster.





3. Remove the electrical connector from the clutch pedal position switch.





4. Remove the clutch pedal position switch from the brake and accelerator and clutch pedal with the bracket.


Installation Procedure





1. Install the clutch pedal position switch to the brake and accelerator and clutch pedal with the bracket.





2. Install the electrical connector to the clutch pedal position switch.
3. Install the instrument panel driver knee bolster.
4. Connect the battery negative cable.