Compressor Mounting Bracket Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the cooling fan drive belt.
3. Remove the cooling fan drive belt tensioner.
4. Remove the A/C compressor and position aside. Do not discharge the refrigerant system.
5. Remove the 4 bolts and the A/C compressor mounting bracket from the vehicle.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the A/C compressor mounting bracket to the vehicle. Secure the bracket with the 4 bolts.

Tighten
Tighten the 4 bolts to 23 N.m (17 lb ft).

2. Install the A/C compressor.
3. Install the cooling fan drive belt tensioner.
4. Install the cooling fan drive belt.
5. Connect the negative battery cable.