LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System - Removal, Installation & Overhaul) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (Pcm): Installation

WARNING: This page is about a different car, the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, and 1998 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Install PCM into vehicle. Connect harness connectors to PCM. Reconnect negative battery cable. If NEW PCM has been installed, PCM MUST BE programmed. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION section.