LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1999 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System - Removal, Installation & Overhaul) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (Pcm): Removal

WARNING: This page is about a different car, the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, and 1998 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Ensure ignition switch is in OFF position. Disconnect negative battery cable. Unplug harness connectors from PCM. Remove PCM from vehicle.

NOTE: After installation of a NEW PCM, Malfunction Indicator Light (MIL) will remain on until PCM is programmed.