LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Trouble Shooting >> System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Check

  1. Drive vehicle at a speed greater than 25 MPH. Move cruise control main switch to ON position. Press SET button once and release. Remove foot from accelerator pedal. If vehicle maintains set speed, go to next step. If vehicle does not maintain set speed, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
  2. Hold slider switch in R/A position until vehicle speed increases 4-5 MPH. Vehicle should accelerate and maintain new set speed. Press SET button until vehicle speed decreases 4-5 MPH. If vehicle decelerates and maintains new set speed, go to next step. If vehicle does not operate as described, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
  3. Depress brake pedal slightly. Cruise control system should disengage. Press slider switch to R/A position once and release. Vehicle should accelerate and maintain previously set speed. Depress clutch pedal. Cruise control system should disengage. Press slider switch to R/A position once and release. Vehicle should accelerate and maintain previously set speed. Quickly press and release (tap-up) R/A switch. Vehicle speed should increase one MPH. Quickly press and release (tap-down) SET button. Vehicle speed should decrease one MPH. If vehicle operates as described, go to next step. If vehicle does not operate as described, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
  4. Simultaneously press SET button and R/A switch. Cruise control system should disengage, but retain previously set speed in memory. Move main switch to OFF position. Cruise control system should disengage, and set speed should be erased from memory. If cruise control operates as described, no problem exists at this time. If cruise control system does not function as specified, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
scientia non olet · About LEMON Manuals