LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Engine Controls Removal & Installation) >> Ignition Systems >> Crankshaft Position Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure CKP sensor mounting surface is clean and free of burrs. Using a NEW CKP sensor "O" ring lubricated with clean engine oil, install CKP sensor into timing cover.
  2. Ensure CKP sensor is fully seated into timing cover before tightening mounting bolt. A poorly seated CKP sensor may perform erratically and may set false DTCs. Install CKP sensor mounting bolt and tighten to specification. See TORQUE SPECIFICATIONS  .
  3. Reconnect CKP sensor harness connector. Install steering linkage shield and tighten mounting bolts to specification (if equipped). Lower vehicle. Perform CRANKSHAFT POSITION (CKP) SENSOR VARIATION LEARN PROCEDURE in COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION.
scientia non olet · About LEMON Manuals