Front Wheel Toe Adjustment

1. Loosen the jam nut on the tie rod (2).
2. Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications (RWD Pick-up) or Wheel Alignment Specifications (4WD Pick-up) or Wheel Alignment Specifications (RWD Utilities) or Wheel Alignment Specifications (4WD Utilities).

Notice: Refer to Fastener Notice in Service Precautions.

3. Tighten the jam nut on the tie rod.
- Tighten the front tie rod jam to 68 Nm (50 ft. lbs.).
4. Check the toe setting after tightening.
5. Adjust the toe setting if necessary.