LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Cavalier LS, 2.4 T >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Electronic Brake Control Module (EBCM) >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Disconnect Electronic Brake Control Module (EBCM) harness connector. Disconnect EBCM harness from bracket. Remove EBCM mounting screws. Remove EBCM.
  2. Clean mounting surfaces. To install, reverse removal procedure. Tighten EBCM mounting bolts to 44 INCH lbs. (5 N.m). Perform ABS diagnostic system check. See appropriate ANTI-LOCK article in BRAKES.
scientia non olet · About LEMON Manuals