LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (HVAC Systems - Manual) >> Repair Instructions >> HVAC Controller Face Plate/Knobs/Button Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the HVAC control assembly. Refer to HVAC Control Assembly Replacement .
  2. Fig 1: Removing HVAC Controller Face Temperature & Mode Knobs
    GM893374Courtesy of GENERAL MOTORS CORP.
  3. Remove the temperature and mode knobs by carefully lifting the edge of the knob with small flat blade screwdriver.
  4. Remove the A/C, rear defog and recirculation buttons by gently prying each outward with a small flat blade screwdriver.
  5. Fig 2: Removing HVAC Controller Face Plate
    GM893376Courtesy of GENERAL MOTORS CORP.
  6. Use a flat blade screwdriver to lift the faceplate tabs over the barbs and rotate the face plate off of the HVAC control assembly.
  7. Install the HVAC control assembly. Refer to HVAC Control Assembly Replacement .