LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Control System - Removal & Installation, Overhaul) >> Ignition Systems >> Ignition Control Module (IDI) >> Removal & Installation (5.7L)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation (5.7L)

WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove fuel rail cover. Disconnect electrical connector from Ignition Control Module (ICM). Remove cover from coils. Remove ICM screws. Remove ignition control module.
  2. To install, reverse removal procedure. Tighten screws to specification. See TORQUE SPECIFICATIONS .